Step 1

Start by sawing Bib Fortuna off at the hips.

Step 2

Snap open Obi-Wan and saw him off at the hips.

Step 3

Pull out the Tuskan Raider's arms.

Step 4

Snap the Obi-Wan chest back together with the Raider arms attached.

Step 5

Glue the Bib hips/legs to the Obi-Wan chest. This will not be a perfect fit so you'll need to disguise it. I wrapped a rubber band around a few times like a sash.

Step 6

Pop off the 'Pilgrim Traitor' head and stick it on.

Step 7

Sculpey on the elaborate headgear. This is rather difficult, so be careful and look at the reference photos. The hat covers the whole back of his head and has a rim and three ripples over it. I accomplished this by rolling Sculpey into little snakes and pressing them into place. This hat took me literally hours.

Step 8

Bake the Sculpey.

Step 9

Trail about an inch of rubber band from each side of his hat down his shoulders.

Step 10

Paint in those ominous dark purples, with red accents. Slop greenish white paint on his face to make it look pitted and disgusting. Use a fine marker to draw eyes.

Step 11

Cut out a vintage-style cape from the fabric and put it on him.

Step 12

Enjoy your very own creepy amoral Imperial Advisor!

Tip provided by:  jdziak@adelphia.net Mark Dziak