Before you begin:

• This Fett is upgraded: he is repainted, with better weapons, and an articulated helmet scope.

Step 1

Using a candle, heat the tip of a sewing needle.

Step 2

Place the heated needle into the top right corner of Boba Fetts head and wedge it in until when you put it in it feels sturdy - remove the needle.

Step 3

Cut the sewing needle about ¼ of an inch.

Step 4

Using a polymer clay, sculpt the scope on Fett's head.

Step 5 (Cape)

Build a small amount of polymer clay on Fett's left shoulder.

Step 6

Shape the clay to make it look part of Fett's costume.

Step 7

Put a sewing needle through the center of the
clay starting from the outside of the shoulder and
moving parallel with the shoulder through the neck.

Step 8

Cure the clay.

Step 9 (Paint)

Using a modern POTF Fett figure for reference, paint the
figure accordingly.

Step 10

While the paint is drying, cut atriangular piece of brown cloth and string brown thread through, you guessed it, a sewing needle.

Step 11

Work the needle though the end of the cloth
that will be attached to Fett's shoulder then remove
the thread from the needle and work it thourgh the
hole you created in the shoulder and tie the thread
(this require patience and precision).

Tip provided by: (Anonymous)