Step 1

Cut the left forearm off at the elbow joint-it connects to the outside part of the joint.

Step 2

Rotate the arm 90 degrees so it looks like the pic, and glue it back onto the joint. If you cut close enough to the joint, the end of the arm should be like a square, and when you glue it back on repositioned, it's barely noticeable. Hold the glue job for about a minute, and then let it dry for about 10 minutes. Once it's dry, gently try and move the arm at the elbow joint to clear out any glue that may be in the joint.

Step 3

Since OOM-9's fingers are pretty soft, they don't hold the muzzle of the rifle well. I used a small dab of krazy glue to keep the "fingers" attached to the rifle.

Tip provided by:  Darth Bunkaroo Andrew Bunk