F O R G O T T E N       F O R C E      U L T I M A T E      R E S O U R C E      G U I D E
 


FFURG RATING

OVERALL

PAINT

SCULPTING

PARTS
Darth Maul by Jay Parente

 

Figure Supplies

  • Jedi duel Darth Maul (Torso, head, arms, pelvis, skirt and light saber)
  • Darth maul with Sith speeder (head, legs and cloak)
  • Sith accessory pack (ignited light saber)

Supplies and Tools

  • X-acto Knife
  • Superglue
  • Drill w/ drill bit
  • Needle nose pliers
  • Lighter
Before you Begin
  • This is a simple Custom that lets you have a generic maul.
Step 1

Boil Both Mauls and remove the legs and head from the speeder bike maul.

Step 2

Remove the Head and arms from the Jedi Duel. with your x-acto knife, cut the peg that holds the front and the back of the torso. then with your pliers, crack open the torso.

Step 3

With your x-acto knife, cut both of the neck pegs off each of the heads, now glue the J.D. peg on the S.B. head.

Step 4

Put the S.B. legs into J.D. pelvis.

Step 5

Put the S.B. head with its new peg, along with the new lower body and J.D. arms on The J.D. torso. glue back together.

Step 6

Now for the sabers, cut the blades off the Sith accessory pack saber. with your drill, drill a hole into both ends of the saber. now you have a saber with removable blades.

Step 7

Now take the J.D. Saber an cut that in half. Now take one, and melt the end of one of them to make it look like it was cut in half.

Step 8

Give him his cloak.

Recipe provided by:  roaddogg_jp@hotmail.com Jay Parente