Start off using the boil and pop method.

Step 2

Remove ONE of Darth Maul's arms.

Step 3

Put the needle nose pliers in the arm socket, and open the pliers so the chest will crack.

Step 4

Now take your Dremel and sand down the "lip" on the peg.

Step 5

Paint the peg white and then red.

Step 6

Put your figure back together.

Step 7

Take your Darth Maul Lightsaber and cut it in half and then take your lighter and melt it a little bit, but not too much!

Recipe provided by:  Yavin4.com Lou Arrico