Step 1

Remove the wings from the ship. Take the mmain portion of the vessel and saw off the undesired sections, from the wing frames back.

Step 2

Use the removed parts to cover the inevitable gaping hole from where we trimmed.

Step 3

Sand down to make even, and you'll even have an exaust port for your trouble!

Step 4

Measure and cut the wings to the desired length.

Step 5

Put wings on the posistion opposite to the original one.

Step 6

Put a TIE pilot in and prepare for the Battle of Endor!

Tip provided by:  OGWAMO2@CS.com Anthony Morisi