Step 1

Take Luke's legs and paint tan paint over the white shirt tails.

Step 2

Take the blue torso and attach to legs. (I used a blue top from a pirate set and sanded down the shirt that was imprinted)

Step 3

Paint the hands tan.

Step 4

Paint a v neck on the shirt and let dry. Outline the v with the black paint.

Step 5

Paint the brown webbing on and let dry. Now carefully outline the pouches on the belts in black. On the right shoulder belt paint two silver moisture containers(see SW#13).

Step 6

Now take the binoculars and cut off the large end. Keep the small end of the binoculars. Use a knife to cut one 45 degree angle on each side of the binoculars (this is so the lens will flush to the head). Glue the binoculars to the head with the small end eye holes facing you.

Step 7

Glue the four eye glass screws to the head equal distant from one another atop the head.

Step 8

Take the cloth tape and cut it into small strips. Place the strips on the head, but don't cover the mouth.

Step 9

Paint the cloth strips tan.

Step 10

Paint the bincular lens silver and paint the eye holes red. Let dry.

Step 11

Cut a small piece of foam into a triangle and round the edges.

Step 12

Paint the foam brown and glue to the mouth.

Step 13

Cut a small half moon shape from foam. Paint silver and apply to face on the brown rebreather.

Step 14

Attach figures head to body.

Step 15

Take the axe and cut off. Now take the axe head and cut it in half so that you will have one of the points to use for the end of his gaderffii. Once cut paint the tip silver and glue to the flat end.

Step 16

Take the X shaped missle piece and cut off all four fins.

Step 17

Glue all four fins about 1/8inch from the pointed end. Paint the pointed end and the fins silver. Let dry.

Step 18

Place the lightsaber and gaderffii in his hands.That is it you are done!

Tip provided by:  david.carnish@rmh.edu David Carnish