F O R G O T T E N       F O R C E      U L T I M A T E      R E S O U R C E      G U I D E
 


FFURG RATING

OVERALL

PAINT

SCULPTING

PARTS
Ketwol by Michael Collins

 

Figure Supplies

  • Luke X wing Pilot (any figure can work)
  • "Independence Day" Bendable figure (1 limb)

Supplies and Tools

  • Super Sculpey
  • A/B epoxy
  • Wire (paperclip)
  • Needle nose players
  • X-acto knife
  • Superglue
  • Acrylic Paints
Step 1

Chop off Luke's Helmet and save for another custom or use another head.  Stick a wire through the head stub and cut and bend it into the basic horn shape.

Step 2

I then cut an arm off of an Independence Day "bendable" alien figure.  I cut it to look like a Pacithhip trunk and super glued it on the nub between the wire horns. (Yup his trunk is bendable, you can also use a tie wire from the toy packaging)

Step 3

I then put A/B epoxy around all that to reinforce and made the actual horns and basic head shape with epoxy as well.

Step 4

Then I pulled out the Super sculpey for all the final face and head details.

Step 5

.Last I made the hands and clothing with A/B Epoxy.

Step 6

Paint his skin kind of a blue/ green.

Recipe provided by:  Michael Collins's Guest Spot Michael Collins